Consolidated Fabricators Corp.
CON-FAB.COM
Online Store Spotlights Locations About Us
Standard Specifications
• Plastic lids.

• 14 GA. Construction with flanged corners and horizontal "V" groove ribs front, back and bottom.

• Interlocking banding.

• 11 GA. 4"x8" Full length gusseted fork channels - on ends reinforced at pick-up points (2" recess or flush front & rear). 1 1/2, 2YD. = 4 gussets per channel, 3YD. = 6 gussets per channel, 4YD. = 8 gussets per channel.

• Channels available on bottom = 4 gussets per channel.

• 1/2" Lid rods with lock washers at ends.

• Lid holders to hold lids open.

• Lid ears to accommodate plastic or steel lids.

• 6" Roller bearing rubber swivel casters with grease fittings (450 lb. capacity ea.).

• 10 GA. Casterplates with flange for strength.

• Interior coated with automotive underseal or rust inhibitive alkyd primer.

• Exterior (including bottom) painted your choice of standard color with alkyd enamel paint. (Some colors may be extra).
Flat Top Container
Quality - Durability - Value
image
Download Brochure
Dimensions
PRODUCT # SIZE HEIGHT WIDTH LENGTH CUBIC YARDS
    A* B C**  
10500*** 1 YD 49" 35" 28" 49" 1.03
10501*** 1 YD 60" 30" 26" 60" 1.00
9095 1 YD 72" 28" 24" 72" 1.04
10504 2 YD FH 34.5" 34.5" 72" 1.84
9003 2 YD IH 38" 34.5" 72" 2.02
9004 2 YD BH 41.5" 34.5" 72" 2.21
10507 3 YD FH 41.5" 41.5" 72" 2.66
10509 3 YD IH 46" 41.5" 72" 2.95
9006 3 YD BH 50.5" 41.5" 72" 3.23
10512 4 YD FH 46" 50.5" 72" 3.58
9008 4 YD IH 50.5" 50.5" 72" 3.94
10514 4 YD BH 56.5" 50.5" 72" 4.40

*Casters Add 8" to Height
** End Loaders = 80"
*** Bottom Channels Only
PRODUCTS      ONLINE STORE      ABOUT US      LOCATIONS      SPOTLIGHTS      CONTACT US      HOME
© Copyright 2010 Consolidated Fabricators Corp. All rights reserved.
Flat Top Container
 
Quality - Durability - Value
image
Standard Specifications
• Plastic lids.
• 14 GA. Construction with flanged corners and horizontal �V� groove ribs front, back and bottom
• Interlocking banding.
• 11 GA. 4�x8� Full length gusseted fork channels - on ends reinforced at pick-up points (2" recess or flush front & rear). 1 1/2, 2YD. = 4 gussets per channel, 3YD. = 6 gussets per channel, 4YD. = 8 gussets per channel.
• Channels available on bottom = 4 gussets per channel.
• 1/2� Lid rods with lock washers at ends.
• Lid holders to hold lids open.
• Lid ears to accommodate plastic or steel lids.
• 6� Roller bearing rubber swivel casters with grease fittings (450 lb. capacity ea.).
• 10 GA. Casterplates with flange for strength.
• Interior coated with automotive underseal or rust inhibitive alkyd primer.
• Exterior (including bottom) painted your choice of standard color with alkyd enamel paint. (Some colors may be extra).
Consolidated Fabricators Corp
Website: www.con-fab.com       Toll Free: (800) 635-8335
 
  Southern California
14620 Arminta Street
Van Nuys, CA 91402
(818) 901 - 1005
(818) 787 - 6312 FAX		 Northern California
901 Simmerhorn Rd.
Galt, CA 95632
(209) 745 - 4604
(209) 745 - 4219 FAX		 Mexico
Calle Maquiladoras #310
Cd. Ind. NVA
Tijuana, B.C. 22500
NOTE: All specifications are subject to change without notice