Consolidated Fabricators Corp.
CON-FAB.COM
Online Store Spotlights Locations About Us
Standard Specifications
• Plastic lids.

• 14 GA. Construction with flanged corners and horizontal V groove ribs front, back and bottom.

• Interlocking banding.

• 11 GA. 4"X8" Full length gusseted fork channels - on ends reinforced at pick-up points (2" recess or flush front & rear). 1 1/2, 2YD. = 4 gussets per channel, 3YD. = 6 gussets per channel, 4 YD. = 8 gussets per channel.

• Channels available on bottom = 4 gussets per channel.

• 1/2" Lid rods with lock washers at ends.

• Lid holders to hold lids open.

• Lid ears to accommodate plastic or steel lids.

• 6" Roller bearing rubber swivel casters with grease fittings (450 lb. capacity ea.).

• 10 GA. Casterplates with flange for strength.

• Interior coated with automotive underseal or rust inhibitive alkyd primer.

• Exterior (including bottom) painted your choice of standard color with alkyd enamel paint. (Some colors may be extra).
Pitch Top Container
Quality - Durability - Value
image
Download Brochure
Dimensions
PRODUCT # SIZE FRONT HEIGHT BACK HEIGHT WIDTH LENGTH
    A* B* C D**
9001 1.5 YD 29.5" 34.5" 29.5" 72"
9002 2 YD 34.5" 41.5" 34.5" 72"
9005 3 YD 41.5" 50.5" 41.5" 72"
9007 4 YD 46" 57" 50.5" 72"

* Casters add 8” to height
** End loader = 80”

image
PRODUCTS      ONLINE STORE      ABOUT US      LOCATIONS      SPOTLIGHTS      CONTACT US      HOME
© Copyright 2010 Consolidated Fabricators Corp. All rights reserved.
Pitch Top Container
 
Quality - Durability - Value
image
Standard Specifications
• Plastic lids.
• 14 GA. Construction with flanged corners and horizontal V groove ribs front, back and bottom.
• Interlocking banding.
• 11 GA. 4"X8" Full length gusseted fork channels - on ends reinforced at pick-up points (2" recess or flush front & rear). 1 1/2, 2YD. = 4 gussets per channel, 3YD. = 6 gussets per channel, 4YD. = 8 gussets per channel.
• Channels available on bottom = 4 gussets per channel.
• 1/2" Lid rods with lock washers at ends.
• Lid holders to hold lids open.
• Lid ears to accommodate plastic or steel lids.
• 6" Roller bearing rubber swivel casters with grease fittings (450 lb. capacity ea.).
• 10 GA. Casterplates with flange for strength.
• Interior coated with automotive underseal or rust inhibitive alkyd primer.
• Exterior (including bottom) painted your choice of standard color with alkyd enamel paint. (Some colors may be extra).
Consolidated Fabricators Corp
Website: www.con-fab.com       Toll Free: (800) 635-8335
 
  Southern California
14620 Arminta Street
Van Nuys, CA 91402
(818) 901 - 1005
(818) 787 - 6312 FAX		 Northern California
901 Simmerhorn Rd.
Galt, CA 95632
(209) 745 - 4604
(209) 745 - 4219 FAX		 Mexico
Calle Maquiladoras #310
Cd. Ind. NVA
Tijuana, B.C. 22500
NOTE: All specifications are subject to change without notice